MD-Textil - V-Belt tactical belt

The V-Belt is an innovative belt for your work or leisure trousers. Its special feature is the 40 mm by 25 mm Fidlock fastener. This is equipped with a small neodymium magnet that automatically closes both halves of the fastener when they are brought into close proximity to each other. The mechanical locking mechanism also prevents the fastener from opening accidentally. The double-layered belt strap has been sewn together with the internal reinforcement with up to 2000 stitches.
The narrow dimensions of the female fastener allow it to be inserted without removing the fastener. The size is adjusted on the male fastener.

- Webbing according to TL 8305-0281
- Velcro area next to the fastener for small patches

Dimensions:
- Fleece surface: approx. 38 x 100 mm
- Female closure width: 34 mm
- Male closure width: 40 mm

S: 80cm-90cm
M: 85cm-95cm
L: 90cm-100cm
XL: 95cm-105cm
XXL: 100cm-110cm
3XL: 105cm-115cm
4XL: 110cm-120cm

To determine the sizes, please proceed as follows:
Wear a pair of trousers that you want to wear with the belt. There should be no belt looped in. Pull the measuring tape through the belt loops and read the waist measurement.
If you want to use the belt over your clothes or as a battle belt, place the measuring tape in the appropriate place. If you want to wear the belt as a system with an underbelt, please order one size larger to compensate for the difference in circumference of the underbelt.

Please note that despite its high load capacity, this is not a personal safety belt or a replacement for PPE.